Introduction:

ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, 
and power management module. The entire solution takes up the least amount of printed circuit board area.
This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,
power and RF properties best, which is safe, reliable, and scalable to a variety of applications.


Features:
High performance-price ratio
Small volume, easily embeded to other products
Strong function with support LWIP protocol, Freertos
Supporting three modes: AP, STA, and AP+STA
Supporting Lua program, easily to develop
Development Board: https://github.com/Nicholas3388/LuaNode 

 

ESP32 ArduinoIDE setuphttp://domoticx.com/arduino-ide-board-esp32-wifi-bluetooth-chip/

 

Meer info (eng):

High Level of Integration

ESP32 is highly-integrated with in-built antenna switches, RF balun, power amplifier, low noise receive amplifier, filters, and power management modules. ESP32 adds priceless functionality and versatility to your applications with minimal Printed Circuit Board (PCB) area requirements.

Hybrid Wi-Fi & Bluetooth

ESP32 can perform as a complete standalone system or as a slave device to a host MCU to reduce communication stack overhead on the main application processor. ESP32 can interface with other systems to provide Wi-Fi and Bluetooth functionality through the SPI / SDIO or I2C / UART interfaces.

Ultra-Low Power Management

Engineered for mobile devices, wearable electronics and the Internet of Things (IoT) applications, ESP32 achieves ultra-low power consumption with a combination of several proprietary software. The state-of-the-art power saving features include fine resolution clock gating, power modes, and dynamic power scaling. 

Robust Design

ESP32 is capable of functioning reliably in industrial environments with an operating temperature range of -40°C to +125°C. Powered by advanced calibration circuitries, ESP32 can dynamically adjust itself to remove external circuit imperfections or adapt to changes in external conditions.

 

Key Features

240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS

Integrated 520 KB SRAM

Integrated 802.11BGN HT40 Wi-Fi transceiver, baseband, stack and LWIP

Integrated dual mode Bluetooth (classic and BLE)

16 MByte flash

2.2V to 3.6V operating voltage

-40°C to +125°C operating temperature

On-board PCB antenna / IPEX connector for external antenna

Sensors

Ultra-low noise analog amplifier

Hall sensor

10x capacitive touch interface

32 kHz crystal oscillator

32x GPIO

3 x UARTs, including hardware flow control
3 x SPI

2 x I2S

12 x ADC input channels

2 x DAC

2 x I2C

PWM/timer input/output availabe on every GPIO pin

OpenOCD debug interface with 32 kB TRAX buffer

SDIO master/slave 50 MHz

Supports external SPI flash up to 16 MB

SD-card interface support

Security Related

WEP, WPA/WPA2 PSK/Enterprise

Hardware accelerated encryption: AES / SHA2 / Elliptical Curve Cryptography / RSA-4096

Performance

Supports sniffer, station, softAP and Wi-Fi direct modes

Max data rate of 150 Mbps@11n HT40, 72 Mbps@11n HT20, 54 Mbps@11g, and 11 Mbps@11b

Maximum transmit power of 19.5 dBm@11b, 16.5 dBm@11g, 15.5 dBm@11n

Minimum receiver sensitivity of -98 dBm

135 Mbps UDP sustained throughput

2.5 μA deep sleep current

 

 

Schrijf een beoordeling

Je moet inloggen of registreren om een beoordeling te plaatsen.

ESP32 WiFi/Bluetooth module ESP-WROOM-32 met CP2102 USB chip

  • Productcode: MOD-9015-ESP32
  • Beschikbaarheid: 2
  • € 9,60

  • Excl. BTW: € 7,93
Maximaal aantal per bestelling: 3

Tags: ESP32, WiFi/Bluetooth, module, ESP-WROOM-32, Geekcreit, V1

Ps. Sommige producten hebben een maximaal bestelbaar aantal!
Sommige producten hebben een limiet op het aantal per bestelling, omdat wij deze producten aan zoveel mogelijk klanten willen aanbieden, of dat inkoop gerelateerd deze producten beperkt te verkrijgen zijn. Wij profileren ons niet als groothandel. Wilt u toch grotere aantallen bestellen van het desbetreffende product?, neem contact met ons op voor de mogelijkheden.